Amplifier with DSP Match PP 86DSP
More about the product
Match PP 86DSP amplifier
Match PP 86DSP is a modern amplifier with a DSP processor for easy installation with the Plug & Play system. It connects to the original speaker system, from which it is able to extract the maximum possible quality of presentation and performance. (The original units usually have a bad sound). It also adds the ability to easily connect one of three types of subwoofers, which adds even more depth to the overall sound. Production and development takes place in Germany by a family company with more than 28 years of tradition.
Unique feature
This device combines maximum compatibility and simple installation. Complete connection cabling is part of the package, so there is no need to cut or modify anything. To connect to your car, you just select the right connector from our database. Also unique is the possibility to upload tuned settings directly to the amplifier. There is a huge database of ready-made tuned cars, which can be easily used for free and uploaded to the device using a micro SD card. The PP 86DSP also offers other expansion options using the MEC (Match Extension Card) and connecting a Bluetooth module or High Resolution Audio USB to this device, which will enable playback in the highest possible quality. Each device then has a cinch output for connecting an additional amplifier.
MEC HD - module for playing music in the highest quality
Even the most demanding users will find their way here. Thanks to the professional and user-friendly interface of the DSP PC-Tool software, individual settings become amazingly simple. So if you can't find the exact settings for your car in the database, or you just want to fine-tune it to your liking, this amplifier is exactly for you.
Absolutely no impact on the car!
Modern high-level ADEP.2 inputs ensure perfect functionality for Match brand products even in the latest cars. This is because some cars have a speaker sensor and recognize incorrect connections and turn off the signal. This then leads to signal problems for the external amplifier. Thanks to the energy saving mode, the device automatically switches off after 60 seconds when there is no input signal. In cars with a CAN bus, the device can remain "invisible" on for up to 45 minutes. However, the consumption is reduced to 0.25 A. This means that there are absolutely no problems with the original electrical installation and battery discharge.
HD class technology
In the PP 86DSP, the advantages of Class H technology are combined with the principle of a Class D amplifier. The result is an unsurpassed level of efficiency that again surpasses conventional Class D amplifiers. The advantages of the Class HD concept are manifested at low and medium modulation levels, as the power supply regulates the internal supply voltage of the power amplifiers. degrees depending on the amplitude of the input signal. This drastically reduces the average power loss generated by the amplifier.
High level intelligent input
Modern, factory-installed car radios are becoming more intelligent when it comes to diagnosing connected speakers. If an amplifier is connected to the radio instead, there are usually error messages or loss of individual functions, e.g. the new ADEP (Advanced Diagnostics Error Protection) circuit prevents all these problems without unnecessarily loading the radio's speaker outputs at high levels.
Start-Stop capability
The power supply in the PP 86DSP amplifier provides internal power even in case of short-term drops of up to 6 volts. This ensures that the amplifier remains fully functional even when the engine is started. If the voltage on the board drops below 10.5 volts for more than 5 seconds, the amplifier will go into "Protect Mode" (status LED is solid red) to prevent further discharge of the battery.
Automatic digital signal detection
Switching between analog and digital input is controlled by a signal. As soon as an audio signal is detected at the optical input, the amplifier switches to this input. This function can be deactivated in the DSP PC-Tool or alternatively manual control can be selected using the optionally available remote control.
Power saving mode
The power saving mode allows to drastically reduce the power consumption of the PP 86DSP (and any additional connected amplifiers) if there is no input signal for more than 60 seconds. When "Power Save Mode" is active, the PP 86DSP's internal amplifier stages and the remote output are switched off, significantly reducing power consumption. The amplifier will return to normal operation within 2 seconds as soon as there is a music signal at its input. The switch-off delay can be changed or completely disabled using the DSP PC-Tool software.
Key properties
- Powerful 8-channel HD class amplifier with integrated 9-channel 64-bit DSP.
- MATCH expansion card (MEC) slot for additional input/output modules such as Bluetooth ® audio streaming, USB high-definition audio streaming, etc.
- Intelligent 6-channel high-level input with ADEP (Advanced Diagnostics Error Protection) circuitry.
- Adjustable input sensitivity from 5 to 11 volts.
- Start-Stop capability up to a supply voltage of 6 volts.
- Optical input in SPDIF format with sampling frequency between 12 and 96 kHz.
- Auto Remote switch to enable/disable automatic power-up of the amplifier via high-level inputs.
- Dual mono cinch output for connecting other amplifiers, e.g. subwoofer amplifiers.
- Simple installation using the included Plug & Play connection cable.
Package contains
- 1x Match PP 86DSP amplifier.
- 1x USB cable.
- 1x PP-ISO 2 cabling (2.2 meters long).
- 1x connection cables for speakers E - H 0.5 m.
- 1x connection cable for high-level inputs E + F 0.2 m.
- 1x mounting material.
- 1x instruction manual.
| Catalog number | PP 86DSP |
| Brand | Match |
| Links | Official web presentation |
| Number of amplifier channelsAmplifiers are divided into: - Monoblocks - 2-channel - 3-channel - 4-channel - 5-channel - 6-channel - multi-channel Each channel is used to power one speaker for the coaxial type, or one side if they are component speakers. Monoblock type amplifiers are mainly used for subwoofers. 2-channel are suitable for both subwoofers and, for example, the front pair of speakers in a car. 3-channel is used for front or rear speakers + subwoofer. 4-channel are used for front + rear speakers or 1 pair of speakers + subwoofer. 6 or 5-channel are used for 2 pairs of speakers + subwoofer, most often. Bridging means connecting the amplifier to a bridge, using the + pole from one channel and the - pole from the other channel. In most cases this is shown as "BRIDGED" on the amplifier. | 8 |
| Energy class of the amplifierAmplifiers are divided into two basic classes: analog and digital . Analog amplifiers (A/B) have higher consumption requirements, but usually have a more natural sound. Digital amplifiers (D) have significantly lower consumption and higher efficiency, but the sound may not be as faithful as with classic analog amplifiers. | HD digitální |
| RMS power into 4 ΩRMS power when loading speakers or subwoofer at 4 Ω. RMS power is the constant power of the amplifier and is one of the most important parameters when choosing an amplifier. | 8 x 55 W |
| RMS power into 2 ΩRMS power when loading speakers or subwoofer at 2 Ω. RMS power is the constant power of the amplifier and is one of the most important parameters when choosing an amplifier. | 8 x 70 W |
| Max. (maximum) power at 4 ΩPeak performance "Max." , which the amplifier can develop for a very short time. A relatively unimportant parameter. It is mainly a marketing move to attract customers to high numbers. | 8 x 110 W |
| Frequency rangeThe ability of the amplifier to reproduce the signal from the lowest frequency to the highest = faithfully reproduce the sound in a specific frequency band. Professionally: In the frequency range from 40 to 16,000 Hz, the vast majority of fundamental and overtones (harmonics) of all musical instruments are found. We are interested in the course of the radiated sound pressure in this range of frequencies when the loudspeaker system is supplied with constant power. We call this course the frequency characteristic, which tells us the level of radiated sound pressure in decibels (dB) depending on the frequency. The frequency characteristic of a speaker or speaker system can be expressed most succinctly with a graph. Mostly, however, the frequency characteristic is indicated by indicating the maximum tolerance of the sound pressure in the given frequency range, e.g. 50 to 15,000 Hz -+ 6 dB. Since the frequency characteristics of loudspeakers and systems in general are quite uneven, some manufacturers do not even specify this maximum tolerance of sound pressure in decibels in their catalogs for reasons of prestige. Data impoverished in this way is unfortunately worthless. What is valid is that the manufacturer offers a speaker system with a frequency range of 30 to 20,000 Hz, if he is worried about stating the maximum unevenness of the sound pressure in this range, because he can have a tolerance of, for example, +- 20 dB. The unevenness or undulation of the frequency curve in good speaker systems for high-quality music performance should not exceed +-3 dB in the 80 to 12,000 Hz band and +-6 dB in the 40 to 16,000 Hz band. Greater unevenness already depletes or emphasizes certain tonal areas, which can cause audible or even disturbing distortion. The proportion between fundamental tones and higher harmonics also changes, thereby changing the color of the sound, and individual musical instruments as well as the entire musical image sound unnatural. | 20 - 22000 Hz |
| Harmonic Distortion (THD)Total harmonic distortion indicates how much the input signal is distorted in the amplifier. Distortions appear as overtones contained in the output signal. The proportion of originally absent parts of the signal is given as a percentage, typical values are between 0.001% and 0.5%. Distortion is measured in their power band. If it exceeds the limit of 0.7% from a certain power, it is the value of the output power of the given amplifier, from which it no longer plays without distortion and from which the distortion usually increases steeply, so that no further increase in power can be counted on. The lower the value, the better. | < 0,015 % |
| Signal-to-noise ratioThe signal-to-noise ratio means that the output signal always contains noise. The signal-to-noise ratio expresses how much of this noise is compared to the useful signal. The so-called A value is given, which does not take deep and very high frequencies into account. This corresponds to the characteristic of human hearing, which is not so sensitive to deep frequencies, especially below 1 kHz. The higher the value, the better the amplifier is. | 103 dB |
| Input sensitivityIn order for the amplifier to perform its function correctly, it requires an input signal of a certain level, which is different for car radios. It is measured in "Volts" (e.g. 2 V, 4 V, etc.) The higher the value at the output of the pre-amplifier, or car radio, the less demands are placed on the power of the amplifier. However, the amplifier must allow this input sensitivity, and for that reason this value is also given for the amplifier. | 5 - 11 V |
| Damping factorDF - Damping Factor . It is the ratio of the load (repro + cables, crossover, etc.) to the internal resistance of the amplifier. The bigger the DF, the more controlled the bass. Amplifiers with a lower DF tend to hum. Subwoofers with a higher Q in the bass reflex and sometimes in the enclosure will also cause humming. | > 100 |
| The value of the fuses on the amplifierFrom the value of the fuses on the amplifier, you can get a true picture of the real performance of the amplifier. | 2 x 25 A mini |
| Dimensions of the amplifier | 260 x 50 x 190 mm |
| Other | Vstupy: 6 x Highlevel repro, 1 x MEC (Match Externí modul), 1 x remote |
