Gladen GA-165SLIM-3 speakers
mid-bass speakers, Ø 165 mm, 65/95 W, 92.6 dB, 3 Ω, mounting depth 49 mm
More about the product
More about the product
Gladen GA-165SLIM-3 mid-bass speakers
The M-Line model series benefits from the advanced technologies of Gladen's higher speaker ranges and extensive experience in speaker construction, enabling great sound reproduction at an affordable price. The second generation of this model series continues the successful bestseller of the German manufacturer and brings several improvements. It is worth noting the stronger and more stable steel basket with improved waterproof treatment and the innovative glass fiber membrane. All converters of the M-Line series have a high level of efficiency, which was achieved by an effective combination of storage and low weight of the membrane. Above-standard sensitivity, together with a reduced impedance to 3 Ohms, will allow convenient connection to factory and aftermarket car radios without the need to install an external amplifier. The success of these popular speakers lies not only in the great sound of the given price category, but also in the ease of installation and 100% reliability.
Main features of Gladen HG-165SLIM-3 speakers
- Mid-bass speakers of the M-Line series.
- Low installation depth of only 49 mm.
- High sensitivity and reduced impedance of 3 ohms.
- Vibrating membrane of blue color made of glass fiber.
- Centering membrane - bellows made of meta-aramid fiber with strong resistance (Nomex).
- Solid steel basket with waterproof treatment.
- The dome of the oscillating diaphragm with zero protrusion for better propagation of upper frequencies.
- 70 mm mid-bass magnet with rubber protection.
- Rubber hinge for long-term durability.
| Catalog number | GA-165SLIM-3 |
| Brand | Happy |
| Links | Official web presentation |
| Speaker typeCoaxial speakers: Coaxial speakers are characterized by a so-called all-in-one design. The tweeter and mid-bass speaker are in one basket. The advantage is simpler assembly, but thanks to the connection or proximity of the bands in one speaker, the sound quality will usually be reduced. As a rule, in the middle of the mid-bass speaker, there is a tweeter whose voice coil works in the second air gap of the common magnetic circuit. The three-way coaxial speaker consists of a mid-bass speaker, a center speaker and a separate tweeter in the front on a special beam. Component Speakers: Component speakers are characterized by a division into individual frequency bands, treble + mid-bass + or. bass band. The individual speakers can be placed completely separately, which results in a better sound and acoustic performance. In the vast majority of cases of component speakers, an external crossover is also supplied, which divides the treble, middle / mid-bass, and into the three-band the bass band or allows setting the decibel level of the tweeter (e.g. +2 dB, 0 dB, -2 dB), steepness (e.g. 6dB/Oct. 12dB/Oct.) or active or bi-amp connection. | Středové |
| RMS powerRMS speaker power is the constant power of the entire system, not just one speaker or one side. This is also the performance of continuous use of the speakers. If the RMS power is exceeded for a long time, the speakers may be irreversibly damaged! | 80 W |
| Max. (maximum performancePeak performance , which the speaker can play for a moment (approx. 0.5 s), for example when hitting drums in a song. If the max power is exceeded, the speakers will usually be damaged! | 120 W |
| Sensitivity (SPL 2.83V/1m)Sensitivity, sensitivity or efficiency of the speaker. Speaker sensitivity is given in decibels (dB) and simply put, the higher the value, the lower the demands on the amplifier's power. This is a defacto rating of how a speaker converts watts to sound. Sensitivity ratings are in noise level measured at 1 meter from the speaker using 1 W (watt of power) or using 2.83 volts at the source at 1 meter. A higher decibel level means the speaker is louder with less power. For every 3 dB increase in sensitivity, the speaker requires half the power to reproduce the same volume. For example, if an 88 dB speaker needs 100 Watts to produce a certain volume, then a speaker with a sensitivity of 91 dB needs only 50 Watts to reach the same volume. | 92,6 dB |
| ImpedanceImpedance - measurement of electrical resistance. When buying speakers, it is important to make sure that the impedance matches the amplifier or car stereo you are using. Example: A 2 Ohm speaker cannot be connected to an amplifier that is only stable up to 4 Ohms! A 4 Ohm speaker can easily be used with an amplifier that is stable up to 2 Ohms. The most common speaker impedance today is 3 - 4 Ohm. | 3 Ω |
| The diameter of the mid-bass speakerWe state the diameter of the speaker as the diameter of the entire speaker, not including the mounts, when smaller speakers (87, 100, 130 mm) have extra mounts. Some speakers are oval and there the dimension is given in inches, always the shortest side to the longest side. One inch is approx. 2.5 cm. | 165 mm |
| Installation depth of the mid-bass speakerThe installation depth of the speaker is measured from the bottom edge of the magnet to the bottom edge of the tin, plastic or cast speaker basket, or speaker bearing surfaces. | 49 mm |
| Frequency crossover included in the packageThe crossover is an important part of defacto all loudspeakers. A crossover usually contains different resistor values, coil sizes, and capacitor types that fundamentally modify the sound. We describe below what the turnouts are for. Component Speakers: A crossover is part of every quality component speaker system. Its task is to ensure the distribution of frequencies that the amplifier produces in the entire acoustic spectrum of frequencies so that each of the speakers receives only that part of the band that it can optimally play in terms of efficiency and minimal distortion. Coaxial speakers: In most cases, coaxial loudspeakers have a simple crossover (6dB/Oct.) formed by a capacitor at the tweeter. | Ne |
| Price forIf the price is for a pair, the package always includes 2 pieces of everything, e.g. 2x mid-bass, 2x tweeter and 2x crossover. | Pár |
Product comments
Evaluation
You might also be interested
Comfort mat S2
TipQuick previewanti-vibration material, 700 x 500 mm, thickness 2 mm, MLF 0.26, weight 3.23 kg/m²6,63 EURIn stockComfortmat Cobra
TipQuick previewanti-vibration material, 700 x 500 mm, thickness 2.3 mm, MLF 0.40, weight 2.71 kg/m²10,79 EURIn stockComfortmat Integra
TipQuick previewsound insulation material, 700 x 500 mm, thickness 6 mm, insulation 27 dB, weight 2.91 Kg/m²10,38 EURIn stockComfort mat Tsunami
TipQuick previewacoustic sound-absorbing material, 500 x 350 mm, thickness 18 mm, weight 1.22 kg/m²10,38 EURIn stockComfortmat Soft Wave 15
TipQuick previewsound absorbing material, 700 x 500 mm, thickness 15 mm, weight 0.51 kg/m²10,38 EURIn stockGladen M 165 Slim
Quick previewcomponent speakers, Ø 165 mm, 65 W RMS, 3 Ω, 92.6 dB (2.83V/1m), mounting depth 52 mm159,00 EURIn stock
TipQuick previewanti-vibration material, 700 x 500 mm, thickness 2 mm, MLF 0.26, weight 3.23 kg/m²6,63 EURIn stockComfortmat CobraTipQuick previewanti-vibration material, 700 x 500 mm, thickness 2.3 mm, MLF 0.40, weight 2.71 kg/m²10,79 EURIn stockComfortmat IntegraTipQuick previewsound insulation material, 700 x 500 mm, thickness 6 mm, insulation 27 dB, weight 2.91 Kg/m²10,38 EURIn stockComfort mat TsunamiTipQuick previewacoustic sound-absorbing material, 500 x 350 mm, thickness 18 mm, weight 1.22 kg/m²10,38 EURIn stockComfortmat Soft Wave 15TipQuick previewsound absorbing material, 700 x 500 mm, thickness 15 mm, weight 0.51 kg/m²10,38 EURIn stockGladen M 165 SlimQuick previewcomponent speakers, Ø 165 mm, 65 W RMS, 3 Ω, 92.6 dB (2.83V/1m), mounting depth 52 mm159,00 EURIn stockask us