Preparation for the protection and maintenance of interior plastics Meguiar's Hyper Dressing (3.78 l)

Meguiar's Hyper Dressing

Professional preparation for providing effective protection, revival and final appearance to hardened and softened plastics and rubber parts in the interior and exterior of the car, engine compartment and tires. By changing the dilution ratio, you can easily change the final appearance of the surface - from a high gloss to a matte finish. Simple and effective to use, it is pleasantly perfumed for additional scenting of the interior and easier work. Completely mild - that's D170 Meguiar's Hyper Dressing!

Interior maintenance tips

• Apply all preparations above the floor of the car interior to a cloth or applicator and then to the cleaned surface, unless explicitly stated otherwise.
• When applied with a sprayer directly to the treated surface, the product may be splashed onto the surrounding surfaces.
• Application with a moistened cloth or applicator will prevent the unwanted penetration of the product into the electrical installation and other delicate parts of the vehicle.
• Do not let the product dry on the surface!

Recommended Action

• Before application, clean the surface with a suitable cleaner.
• Work in the shade and on a clean surface that is cool to the touch.
• Shake the product before use.
• Spray onto a clean microfiber cloth and spread over the treated surface.
• Work on smaller areas (max. 50 x 50 cm).
• Wipe dry with the dry part of the microfiber cloth.
• Continue with the same procedure on other surfaces.

Product features

• Revitalizes and protects all interior, exterior and engine plastics and rubber, incl. tires and gives them a final look.
• Made on the basis of water - 100% gentle.
• It contains additives that protect the surface against aging and fading caused by UV radiation.
• It does not create a greasy or slippery surface.

Application methods

• Spray and wipe

Dilution

• Concentrated (RTU) / 1:1 - high gloss
• 2:1 - semi-gloss
• 3:1 - satin finish
• 4:1 - natural (matte) finish

Not overcoatable, VOC compatible