Decontamination disc CarPro PolyShave Pad - 150 mm

Decontamination disc CarPro PolyShave Pad - 150 mm

The CarPro PolyShave disc is equipped with a functional layer made of a special polymer. It is attached to an eccentric polisher or sander and replaces the laborious and lengthy decontamination of paint with clay. With the PolyShave disc, the cleaned surface needs to be lubricated, but it is possible to use any car shampoo instead of a special lubricant. With the PolyShave material, there is no risk (unlike clay material) of damage due to detergents and subsequent flouring and deterioration. This advantage brings not only financial savings, but also additional time savings - immediately after washing, it is possible to proceed to decontamination and use the rest of the shampoo as a lubricant. At lower temperatures (below 15°C), traditional clay solidifies and is not able to copy the surface well. Thanks to the foam core, the CarPro PolyShave disc perfectly copies the surface, so this problem is eliminated. After work, just wash the disc and it is ready for the next work. The CarPro PolyShave disc removes fly rust, asphalt residue, oxidation and other accumulated dirt that remains even after washing and causes roughness and loss of shine. Like the clay material, the PolyShave disc is also able to remove overspray after painting. After decontamination, the paint is free of foreign bodies, it is beautifully smooth and ready for polishing or waxing. The CarPro PolyShave block is suitable not only for cleaning paint, but also for glass and chrome.

Key Features CarPro PolyShave Pad - 150mm

• The ultimate substitute for clay mass - shortens the decontamination time from tens of minutes to minutes.
• Perfectly copies the surface, works even at lower temperatures.
• Longer service life - approx. 30 cars.
• Use with a polisher - eliminates hand and finger fatigue.

Procedure for working with CarPro PolyShave Pad - 150 mm

• Wash the vehicle thoroughly first.
• It is not necessary to dry it after washing.
• Prepare a suitable lubricant intended for clay.
• Lubricate the surface while working.
• Lightly run the working surface of the PolyShave Block in parallel strokes over the lacquer without exerting much pressure.
• At first you will hear and feel how the block rubs against the paint - it removes dirt.
• Continue until the block slides smoothly over the paint.
• Wash the PolyShave Block regularly during work.
• Lightly moisten the cleaned surface again with lubricant and gently wipe with a suitable microfibre cloth .

Product comments

Evaluation

• Car cosmetics Car exterior maintenance Cleaning and decontamination of paint Clay
• Car cosmetics Car exterior maintenance Polishing the paint Polishing pastes
• Car cosmetics CARPRO